COMPLETE ORBI RBR50 SETUP AND UPDATE GUIDE

Complete Orbi RBR50 Setup and Update Guide

Complete Orbi RBR50 Setup and Update Guide

Blog Article

The Orbi RBR50 is built with powerful mesh networking capabilities. In this step-by-step setup guide, learn how to install your Orbi router quickly and get the most out of your internet connection. In this guide, we will also explain how to update the Orbi WiFi router via different methods.

Setting Up Orbi RBR50 Router


Via Orbilogin.net in PC



  1. Connect the Orbi router's WAN port (yellow) to your modem using the included Ethernet cable. Power on both the modem and the Orbi router.

  2. Open the WiFi settings on your computer or laptop and Connect to the Orbi’s default network.

  3. Choose any browser and in the browser’s address bar, type the login URL orbilogin.net or IP address 192.168.1.1 and search it.

  4. You will see the Orbi setup login page on the screen, to login type in the admin details.

  5. The default username is: admin, and the default password is: password.

  6. you should Check the label on your Orbi router for the default credentials if these don't work.

  7. Accept the Terms and Conditions. Setup your Wi-Fi network name (SSID) and password.

  8. This will be the name and password for your entire Orbi mesh network.

  9. Setup your administrator password for the Orbi system.

  10. The wizard might also guide you through checking your internet connection.


Via Orbi App in Phone



  • Download the Orbi app from the Google Play Store or Apple App Store.

  • Open the app and create or log in to a NETGEAR account.

  • The app will detect your Orbi router automatically. You'll be guided to: Name your WiFi network, and set a password.

  • SAVE the settings and a new network will be shown into the Wi-Fi list of the phone.


How to Update Orbi RBR50 Router?


Through the Orbi App



  1. Ensure your Orbi system is online and you are connected to its Wi-Fi network.

  2. Open the NETGEAR Orbi app on your smartphone or tablet. Log in to your Orbi account if prompted.

  3. Navigate to the settings or menu within the app. The location of the firmware update option might vary slightly depending on the app version, but it's often found under Settings. Look for Firmware Update.

  4. The app will usually automatically check for available updates. If not, there might be a button to "Check for Updates."


Through the Orbilogin.net


Access the interface Navigate to the Firmware Update section: The location might vary, but typically it's under Advanced > Administration > Firmware Update.

Check for Updates:

  • Online Update: Click the "Check Online" or similar button to see if NETGEAR has a new firmware version available.

  • Manual Update: If you've downloaded the firmware file from the NETGEAR support website, click the "Browse" or "Choose File" button, locate the downloaded firmware file and then click "Upload".

Report this page